Aluminum Alloy 5754 sheet
5754 aluminum sheet is usually an alloy in the wrought magnesium-aluminum family. Since 5754 alloy contains the highest percentage of aluminum components, it is used in many applications. Aluminum alloys are formed through certain processes, which are rolling, extrusion, and forging in sequence, rather than casting. 5754 aluminum sheet is cold worked but has low ductility. Apart from aluminum, it also contains iron, silicon, manganese, copper, chromium, magnesium, and zinc. Aluminum alloys have excellent corrosion resistance, especially in industrial pollution situations. It exhibits higher strength, which is why it is used in numerous applications. 5754 alloy sheet is available in many forms. It is very suitable for welding, such as arc welding and gas welding. It has high machinability and workability.
Aluminum Alloy 5754 Plate Specifications
Standard: ASTM B209 / ASME SB209
State: O, F, H12, H14, H16, H18, H19, H22, H24, H26, H32, H34, H36, H38, H111, H112, H321, T3, T4, T5, T6, T7, T351, T451, T651, T851
Thickness: 0.2~300mm
Width: 500~2500mm
Length: 500~10000mm
Surface: bright, polished, hairline, brushed, sandblasted, checkered, embossed, etched, etc.
Surface treatment: rolling, customer specified surface treatment
Aluminum plate/sheet coating: PVC Coating, color coating, polyester, fluorocarbon, polyurethane and epoxy coating
Type: hot rolled (HR) / cold rolled (CR) sheet / plate / strip / coil / patterned plate
Chemical composition
| Chemical Composition Limits |
|
| weight% |
Al |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Zn |
Ti |
Others
total
|
| 5754 |
94.2
-97.4
|
0.4
max
|
0.4
max
|
0.1
max
|
0.5
max
|
2.6-3.6 |
0.3
max
|
0.2
max
|
0.15
max
|
0.15
max
|
English
Español
