Drill Bit

7-1 Standard connection.
CSC bit is suitable for any rock formation.
CSC bit is versatile and can handle changing formations.
PDC Main cutters are high performance PDC cutters to insure service life of the bit while improving ROP.
Hydraulic system of the bit is optimized using dynamic flow pattern simulation technology to enhance cleaning and cooling effects of the bit to effectively prevent bit from balling.
PDC Drill Bits

Model:PDC Bit, PDC Drag Bit
Bit Size: 4-1/2″ ~ 17-1/2” (114mm ~ 444.5mm)
Blades: 3 ~ 9 blades
Nozzles: according to customers’ requirement
Cutters Size: 1313, 1613, 1616, 1913, 1916, 1919
Material: Carbide
WOB (KN/mm): 0.35 ~ 0.90
Rotary Speed (rpm): 300 ~ 800
Customized: Please provide bit size, blade QTY., cutter type etc.

A drill bit is a device attached to the end of the drill string that breaks apart, cuts or crushes the rock formations when drilling a wellbore, such as those drilled to extract water, gas, or oil.

The drill bit is hollow and has jets to allow for the expulsion of the drilling fluid, or mud, at high velocity and high pressure to help clean the bit and, for softer formations, help to break apart the rock.

CSC drill bits: A CSC bit comprises three conical rollers with teeth made of a hard material, such as tungsten carbide. The teeth break rock by crushing as the rollers move around the bottom of the borehole.

PDC drill bits: A PDC bit has no moving parts and works by scraping the rock surface with disk-shaped teeth made of a slug of synthetic diamond attached to a tungsten carbide cylinder

PDC drag bit: A drag bit is a comprehensive drilling bit, mainly used for water wells, mining, geothermal, environmental and exploration drilling. It is suitable for drilling in soft and soft-medium formations with fast penetration rate and high efficiency, and special for the large diameter holes’ drilling.