The concrete coating can be used as an anti-corrosion layer to protect steel pipes. At the same time, it can also increase the weight of the pipe to ensure that the pipe will not move under the action of water and prevent some mechanical damage during laying and use. This article will introduce in detail the coating equipment for concrete coated pipes.
- Concrete mixing station
It is used for mixing and supplying concrete.
- Concrete feed hopper
It is a temporary storage place for concrete between the mixing equipment and coating system.
- Concrete conveyor
It is used to transport concrete into the hopper. It is the transition between the concrete feed hopper and the coating system.
- Impact throwing device
It coats pipes by pouring concrete on their surfaces.
- Pipe painting trolley
The pipe coating carriage consists of a power carriage containing a variable speed drive for pipe rotation and travel, and an idler carriage containing a longitudinal drive for adjusting the length of the pipe.
- Wire distributor and accumulator system
Wire distributor and accumulator systems are used to guide wire mesh from wire spools to wire guide systems.
- Wire system assembly
The wire guide assembly is used to guide two wire meshes received from the wire feed system to the rotating pipe during the coating operation.
- Recycling system
Recycling systems are used to recycle concrete that does not adhere to pipes.
- Weigh Station
Used for weighing coated pipes.
- Pipe end trimming machine
It is mainly used for cutting and cleaning the coated pipe ends to facilitate welding and laying.
English
Español
